ATV Build Timeframe/Steps:
	
			Get all the parts.
			Test if the engine works.
			Design the chassis and everything attached to it.
		BUILD:
			1.  Welding the base of the chassis along with footpads and brackets.
			2.  Refurbish and paint the spindles.
			3.  Weld the suspension wishbones and attach it to the frame along with the spindles.
			4.  Weld the rest of the chassis
			6.  Weld all of the supports that are going to hold the ATV body.
			7.  Prime and paint the chassis.
			8.  Mount the front suspension.
			9.  Mount the engine.
			10. Weld the rear swingarm.
			11. Build the rear axle carrier
			12. Mount the brake and sprocket.
			13. Rear suspension.
			14. Transmission and everything associated.
			15. BRAKES - front and back.
			16. Engine retest, suspension test, rear swingarm test, brake test, transmission test.
			17. Fixing all the problems that occured in #16.
			18. Fabricating the rear hubs.
			19. Make the seat.
			20. Refurbish and paint the rims.
			21. Mount the tires on the rims and mount everything on the ATV.
			22. 1 km paved road TEST.
			23. Fixing all the problems that occured in #22.
			24. Making the body out of class fibre.
			25. Painting the body.
			26. Mounting the body
			27. 10 km OFFROAD TEST.
			28. Fixing all the problems that occured in #27.
			29. Small finishings on the body.
			30. Mount Hella lights at the front.
			31. Mount a brake light to the rear and link it with both brake systems (front & rear are separate).
			32. Speedometer - electronics.
			33. Speedometer - housing.
			34. Speedometer - linking and testing.
			35. Refurbish the handlebar.
			36. Rear rack out of 1 cm steel and paint it w\ some antiabrasion paint/teflon.
			37. Front rack out of 1 cm steel and paint it w\ some antiabrasion paint/teflon.
			38. Front bumper.
			39. Skid plates for the rear swingarm and transmission.
			40. Skid plating around the bottom of the chassis.